Spiral plate heat exchanger use range
Published on.
2022-12-20 11:36
Ordering Instructions:
1, the choice of equipment, should be through the appropriate process calculations, so that the fluid in the equipment channel to achieve a certain flow rate, (generally liquid flow rate ≥ 1m / s, gas flow rate ≥ 10m / s), to meet the heat transfer effect.
2, such as a single device can not meet the requirements of use, multiple combinations of use, the combination should be in line with the following provisions.
A: single combination: only the same specification of equipment
B: Tandem combination: the width of the plate and channel spacing of the equipment should be the same
C: mixed combination: a channel associated, another channel in series, limited to the same specification equipment.
3、Equipment can be placed lying down or standing, and the equipment used for steam condensation can only be placed standing.
4, used for caustic soda spiral plate heat exchanger, the contract should be specified, made after the overall stress relief treatment.
5、Detachable, conical, heat treatment special horizontal, new spiral plate heat exchanger for instant noodles process parameters, according to customer requirements for separate design.
6, the latest design, supporting the instant noodle line and salad oil refining equipment dedicated, with a small volume, heat transfer area of up to, easy to install and operate, the two channels can be interchangeable, is the Tuhuan column heat exchanger of newer products.
Related News
Contact Us
-
Add: No. 9, East Henggang Street, Yangcheng Lake Town, Xiangcheng District, Suzhou
Person in charge: Mr. Wang
Cell phone：+86 13906207255
-
Tel：+86 13706208766
-
Chief Technical Officer: Lu Jian
Tel：+86 512-65788288
E-mail：13906207255@163.com
Follow us
CopyRight © 2022 Suzhou Jin Xiang Pressure Vessel Manufacturing Co., Ltd